Magnum Venus Plastech PATRIOT SSB Auto - Manual (Page 17)

Patriot SSB Auto Instructions Issue 05 30/06//08 Page 17 of 43
General Note When rebuilding pump assemblies use
Red Grease (6706-2-1 1 oz) on seals
and component mating surfaces
Seal replacement. – Piston shaft seals (PAT-LS -1016)
1. To replace piston shaft seals (PAT-LS -1016) first remove four bolts (CS-06C-32) from
lower inlet body (PAT-LS-1002)
2. Secure the upper outlet body (PAT-LS-1001) and push the piston shaft (PAT-LS-1008)
downwards. This will force the lower inlet body and upper body apart. Put the lower body
aside complete with the piston shaft assembly.