Magnum Venus Plastech PATRIOT SSB Auto - Manual (Page 24)

Patriot SSB Auto Instructions Issue 05 30/06//08 Page 24 of 43
Warning Notes.
If the piston seal assembly is not assembled as per the instructions concerning the lost
motion tolerance the following will occur.
a)
If there is no gap then the pump will seize solid on the down stroke when filled with
catalyst.
b)
If the gap is too great poor catalysation will be evident in the mix.
Important. Ensure the piston bush (4235) is screwed onto the piston the correct way up.
The four small V grooves on the bush MUST be uppermost as shown
Figure 33. Catalyst piston assembly lost motion setting (assy 0100)