Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 129)

Micro-PWC OPERATOR’S MANUAL
Utilities 115
This window allows the user to select the type of disk data files to be listed. The user can choose to list the
files on the hard disk of the Micro-PWC which contains:
• User Models
• Configuration Data
• Databases
• Spreadsheet Logs
Click the toggle button to select the associated item. Once selections have been made, click OK; the Disk
Listing window for that type of data file will be displayed.
The Disk Listing window displays information for each file in each of the selected file types, including the
size, creation time, and name of each file.
11.2.3.3 Restore File Button
The Restore File button provides a method for restoring individual files from the tape. Click Restore File
to create and view a list of the files contained on the tape. If the tape contains a large number of files, a
small window will state:
Tape Listing in Progress
This window will close as soon as creation of a list of files on the tape has been completed; a Tape Listing
window will then be displayed.
The window lists the permissions, user ID, size, file creation (or modification) date and time, path and file
name for all files on the tape. (The settings of the toggle buttons in the Restore window are ignored during
this operation.) Select each file to be restored by clicking on the corresponding line in the list. The selected
file will be highlighted. If an incorrect file is selected, click it again to deselect it. When all files to be
restored have been selected, click the Restore Selected Files button at the bottom of the Tape Listing
window. A confirmation window listing all of the selected files will appear. Click OK to restore the files. If
OK is clicked, the restore operation proceeds as described above.
A Find button is located at the bottom of the Tape Listing window, and can be used to quickly determine
the presence of a given file (or a path name or file name containing a given string) on the tape.
To use this feature, click Find. A pop-up window appears, which contains an entry box, and OK and Can-
cel buttons. Above the entry box is the prompt:
Enter File Name.
Click the entry box, then enter the string for which to search. (Although only 20 characters at a time can be
viewed in the Find window text entry box, enter as many as necessary.) A path, a file name, or a portion of
either can be entered; the first entry in the list which contains the entered string will be displayed at the top
of the list box. Click OK to perform the find operation and close the Find window.
11.2.4 ADP Backup and Restore
The configuration of the ADP association can be backed up and restored using the standard core Micro-
PWC Backup menu item. Backup and restore are started from the System Window, by selecting Menu >
Utilities > Backup/Restore. Following the steps to create a backup file (see
Section 11.2.1, The Backup
Utility ) or perform a restore (see Section 11.2.3, The Restore Utility ). The Backup window will be displayed
( Figure 11-1 ).
✎ NOTE
This operation only displays information about the data contained
on the disk; no information on the disk is changed.