Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual - Manual (Page 26)

Micro-PWC OPERATOR’S MANUAL
12 User Interface
2.4.3.2 Security Parameters
The following security parameters are configurable for each user logged into Micro-PWC:
• Password
• Operator access level
• Area access
• Priority access
• Node access
• Initial displays
• 64 Quick Keys per login name (single window display)
• 16 CRT context keys per login name (multi-window display)
• Message filtering
The following security parameters are configurable for a Micro-PWC with no user logged in (default secu-
rity):
• Operator access level
• Area access
• Priority access
• Node access
• Initial displays
• 64 Quick Key assignments
• 16 CRT context key assignments
• Message filtering
2.4.3.3 Network Parameters
The following network parameters allow for configuration of parameters that are global to the network:
• Alarm setup
• Alarm vectors
• Area names
• Event bit names
• Printer assignment
• Message routing
• Network device assignments
• Operator Window parameters
2.4.4 Mini-Alarm Window
The Mini-Alarm Window appears to the right of the System Window on the screen ( Figure 2-4 ). Like the
System Window, the Mini-Alarm Window appears automatically upon system start up and is visible at all
times, unless it is intentionally covered by the operator or is temporarily covered by a pop-up window.
✎ NOTE
If a client is being run, the event bit configuration can be run only
from the node where the data base resides. This node should be a
server node.