4 resetting the node names window settings, 4 performing the synchronization – Micromod Micro-PWC: 53PW6000 MicroPWC Operators Manual User Manual
Page 163
Micro-PWC OPERATOR’S MANUAL
Utilities 149
11.13.3.4.4 Resetting the Node Names Window Settings
To clear the current settings in the Node Names window, click Reset. Clicking on this button will have the
following effects.
•
selection will default to Specify Replacement Node Names, if no was selected when Reset
was clicked.
•
If New Global Operator Station Prefix was selected, the Prefix entry box will be closed and
selection will change to Specify Replacement Node Names.
•
If Specify Replacement Node Names was selected, any entries in the Replacement Names list
box will be deleted.
11.13.4 Performing the Synchronization
When all items (for which configuration data is to be obtained) have been selected, click the Restore but-
ton at the bottom of the Console Group Synchronization Selection window. A status window will appear
during the synchronization process, which displays the name of each item as synchronization occurs for it.
When the synchronization is complete, a pop-up window will advise:
Restore Completed
Click OK to close the pop-up window.