Minuteman E Ride 28_32 Rider Scrubber - Manual (Page 19)

19
Machine Overview
signal is displayed, all functions will shut off, including transport
mode. The operator must then turn the key switch OFF and then ON
to reset the machine. The machine will then have only a few minutes
left of reserve power to briefly use Vacuum Only mode to pick up any
remaining solution on the floor and Transport mode to return to the
charging station. This gauge will also display a fault code if the sys-
tem has an error. This code is represented by a specific number of
flashing LEDs. See Fault/Diagnostic Codes for specific code informa-
tion.