Minuteman E Ride 28_32 Rider Scrubber - Manual (Page 20)

20
Machine Overview
1.6 Fault/Diagnostic Codes
When an error or fault occurs within the machine, a fault code will ap-
pear on the battery gauge represented by a specific number of flash-
ing LEDs. The figure below shows a listing of the different codes.
Low Battery Indicator
If the battery life is low, the battery gauge bar icon will be flashing to
inform the operator that the machine is almost out of power. Once this
signal is displayed, all functions will shut off, including transport
mode. The operator must then turn the key switch OFF and then ON
to reset the machine. The machine will then have only a few minutes
left of reserve power to briefly use Vacuum Only mode to pick up any
remaining solution on the floor and Transport mode to return to the
charging station.
Power Save Mode
The E Ride is equipped with a power save feature to conserve battery
power. If the key switch power is left ON and none of the controls are
activated for a period of fifteen minutes, the E Ride automatically
goes into “power down mode” and turns OFF the power to conserve
your batteries in case the operator forgets to turn the key switch off or
leaves the machine unattended.
Empty Solution Tank Indicator
Once the solution tank has become empty, the battery gauge will
blink a solid 9 LEDs at a constant interval to alert the operator that the
solution tank needs to be filled.