Diamond Products FZ-4S - Manual (Page 27)

FZ-4S Mounting saw blade unit on wall saw
FZ-4S_e_0205.fm Page 27
 0RXQWLQJ VDZ EODGH XQLW RQ ZDOO VDZ
3UHSDUDWLRQ
z Pre-assemble the quick release flange and
saw blade on the saw blade unit
 0RXQW VDZ EODGH XQLW
The saw blade can be placed in any position.
z Position saw blade unit on hub (1) and twist
(2) until bolts engage
z Press central screw (3) and screw in (4) as
far as the limit stop.
(Sleeve and central screw are countersunk)
Always switch off the drive unit
and relieve the pressure in the
hoses before handling the wall
saw
2 1
3
4