DoorKing 1838 Telephone Access Plus - Manual (Page 26)

Page 26 1838-066-D-1-12
2.4.3 Answer Incoming Call on X Rings
Default setting is 06 (6 Rings).
NOTE: This programming sequence is applicable only if the 1838 will have a telephone line
connected to it.
This programming section sets the number of rings that the 1838 will allow before it picks up the call.
The number of rings to answer can be set from 1 to 12 rings and must be entered as a two-digit
number. For example, if you want the 1838 to answer the call after the sixth ring, enter 0 6 in step 2.
If you program 00 in step 2, this will prevent (disable) the 1838 from answering incoming calls to it.
1. Press * 1 8 and enter the MASTER CODE. [ * 1 8 _ _ _ _ (beep)]
2. Enter the number of rings (01 – 99) then press *. [ _ _ * (beep)]
(enter 00 in this step to disable this feature)
3. Press 0# TOGETHER to end. [0# (beeeeeep)]