DoorKing 1838 Telephone Access Plus - Manual (Page 30)

Page 30 1838-066-D-1-12
2.6 Time Functions
2.6.1 Program Calendar Chip
This programming sequence programs the calendar chip in the 1838 system for the current time and
date. The calendar chip must be programmed if any of the time related features are going to be used.
Note: The clock / calendar chip in the 1838 Access Plus will keep time for approximately 48 hours if
power to the system is lost or removed. If power is off longer than this, the clock / calendar chip will
have to be reprogrammed.
1. Press * 3 3 and enter the MASTER CODE. [ * 3 3 _ _ _ _ (beep)]
2. Enter the current hour (01-12) and minutes (01-59) then press *. [ _ _ _ _ * (beep)]
3. Press 0 * for AM, OR press 1 * for PM. [ _ * (beep)]
4. Enter the month (01-12) day of the month (01-31) and the year (00-99) then press *.
[ _ _ _ _ _ _ * (beep)]
5. Enter the day of the week (1-7) then press *. [ _ * (beep)]
Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
6. Press 0# TOGETHER to end. [0# (beeeeeep)]
EXAMPLE: Saturday, February 14th, 2009, 11:30 AM.
1. * 3 3 _ _ _ _ (beep)
2. 1 1 3 0 * (beep)
3. 0 * (beep)
4. 0 2 1 4 0 9 * (beep)
5. 7 * (beep)
6. 0 # (beeeeeep)