Nova-Tech PGL Series - Manual (Page 10)

5.0 KEYPAD
The keypad has the following keys to operate the balance.
Keys Primary function Secondary function
To turn the balance to ON or Standby ‐
[Î0/TÍ] or [Esc] A combined zero and tare function To escape from setup functions
and modes
[Unit] / Ð or
[Down]
‐Selects weighing units by cycling
through a set of enabled units
‐Scrolls through the options
To decrement or change a
displayed value or scroll through
options backwards
[Mode] / Î or
[move right]
Enters the Mode Selection Menu To advance a flashing digit by one
position to the right.
To go back by one step during
setup functions
[Print] / Í or
[move left]
Instructs the balance to print data To advance a flashing digit by one
position to the left
[Cal] / Ï or [Up] Starts the calibration function To increase or change a displayed
value or scroll through options
forward
[Setup]/
or [Enter]
Enters the Setup parameters
(Supervisor Menus) Enters a function or saves a value
while manually entering unit
weight or check weighing limits
10 | P a g e © Adam Equipment Company 2008