Nova-Tech PGL Series User Manual
Page 28
Basic Input Commands:
!KT<CR>
Tares the balance to display the net weight. This is the same as pressing the [Zero
/ Tare] key when the balance is in the normal weighing mode.
!KP<CR>
Transmits data over RS‐232 interface. This is the same as pressing the [Print] key
when the balance is in the normal weighing mode.
removed unused commands
Invalid Input Command:
If an invalid command is received, then the command is returned as follows‐
Invalid Command
Message returned
Remarks
!NT<CR>
!EU<CR>
Command character is not ‘K’
!KK<CR>
!EK<CR>
Key character is not ‘T’ or ‘P’
!KT‐<CR>
!EF<CR>
Command format error, <CR> is not the
fourth character
KT<CR> or !KT ‐
No reply
Either ‘!’ or <CR> is missing in the
command string
28 |
P a g e
© Adam Equipment Company 2008