Nova-Tech DO 700 - Manual (Page 21)

6.1 HOLD Function
For prolonged observation of a reading, press during
measurement mode to freeze the display. The “HOLD” indicator will
display when the reading is held. To release the held value and
resume measurement, press again or insert the held value into
memory by pressing .
6.2 Storing and Recalling Data
The DO 700 can retain up to 100 data points into memory for
later retrieval.
1) In the measurement mode, press to insert the measured value
into memory. The stored memory location value (StO) is briefly
displayed.
2) To recall data from memory, press . The location of the most
recent stored data is displayed first. Press or to select the
location of the desired data, then press to accept.
3) Press to return to the stored data location. Press to return
to measurement mode. To erase stored data, see Section 5.11 —
Clear Stored Memory .
15