Nova-Tech Digi-Sense Termperature Controller RS (Standard Models) - Manual (Page 12)

9
Temperature Scale
1. After pressing the MENU key in the THERMOCOUPLE screen, the setup
will progress to the Temperature Scale selection. The Temperature scale
selection has five temperature scales from which to choose: Celsius
(°C), Fahrenheit (°F), Reaumur (°R'), Rankine (°R), or Kelvin (K). Refer
to Figure 8.
2. Press the DOWN arrow key to switch to a desired temperature scale.
Press the MENU key to select the appropriate scale.
TEMP SCALE
FAHRENHEIT °F
FIGURE 8. TEMPERATURE SCALE SELECTION SCREEN
Alarm Selections
1. Alarms will activate only when the temperature controller is in the RUN
mode. When an alarm occurs, the alarm LED will flash, the audible alarm
will sound intermittently and the display will flash the type of alarm. There
are two possible alarm setpoints selections: ON or OFF. Refer to Figure
9.
2. To go to the Alarm Setpoints Off Screen, press the DOWN arrow key.
ALARM SETPOINTS
ON
FIGURE 9. ALARM SETPOINTS SELECTION SCREEN