PASCO Xplorer-GLX Users’ Guide - Manual (Page 32)

26 G r a p h
A note with the Data Cursor positioned on it
To make the Data Cursor jump directly to a note, hold and press one of the
arrow keys. Press plus the left or right arrow key to make the cursor jump to
the next visible note in either direction; press plus the up or down arrow key
to make the cursor jump to the first or last visible note. When the cursor lands on
a note, the audio portion (if any) starts playing
16 and the text portion of the note
(if any) appears.
Annotation Menu
To change any of a note’s attributes, position the Data Cursor on the note and
press
; the Annotation menu will open.
If you have a mouse, you can open the menu by clicking the flag icon.
Annotation Menu
Select 17 any of the following menu options.
Edit Note Select this option to open the Note Editor dialog box. There you can
read the text, listen to the audio, enter new text, change existing text, and record
new audio. See “Note Editor Dialog Box” below for instructions.
Always Show Text This option is either turned on (with a check mark appear-
ing next to it in the menu) or off (no check mark). When the option is on, the
note’s text is visible on the Graph even when the cursor is not on the note. To
switch Always Show Text on or off, select it from the Annotation Menu.
Delete Note Select this option to delete the entire note, including the text and
audio portions and the flag icon.
Move Select this option to move the note to a different data point. After you
have selected Move, the flag icon becomes mobile; use the arrow keys (or
mouse) to move the icon to a different data point and press
to attach it to that
point.
Hide All Text and Show All Text Select either of these options to hide or
show the text of all notes in the displayed data run. These options are equivalent
to turning on or off the Always Show Text option for every note.
Delete All Notes Select this option to delete every note in the displayed data
run.
Esc
Esc
Esc
16 If you have not changed the default
setting, the audio plays through the
GLX’s built-in speaker; otherwise it plays
through the output device specified in
the Audio Settings dialog box, which is
accessed from the Settings screen. See
page 87 for more information.
17 To select and option from the
Annotation menu
Keypad
1. Position the Data Cursor on the data
note.
2. Press to open the menu.
3. Use the arrow keys to move the high-
light to the desired menu option and
press
; or press the number on
the keypad corresponding to the
desired menu option.
Mouse
1. Click the flag icon (
) to open the
menu.
2. Click the desired menu option.