PASCO SPARK Science Learning System User's Guide - Manual (Page 40)

32 D ATA DISPLAY
D ISPLAYING DATA IN A METER
Displaying data in a meter
Creating a new meter
To create a new meter, do one of the following:
• If the Home screen is visible, create a new SPARKlab:
a. Touch a measurement.
b. Touch Show.
A SPARKlab appears.
c. Touch the Page Navigator to turn to the meter on page 4 of the
SPARKlab.
• If a SPARKlab is open, add a new page:
a. Touch the New Page button.
The Page-build screen opens.
b. Touch a measurement.
c. Touch the Meter button.
d. Touch OK.
A new page containing a meter is added to the SPARKlab.
Showing and hiding the meter tool palette
• To show the tool palette, touch the blue Meter Tools button near the
lower left corner of the meter.
• To hide the tool palette, touch the orange Meter Tools button.