PASCO SPARK Science Learning System User's Guide - Manual (Page 41)

D ATA DISPLAY 33
D ISPLAYING DATA IN A METER
Adjusting the scale of a meter
Scaling a meter to fit all data
1. Touch the Meter Tools button to open the tool palette.
2. Touch the Scale-to-fit button.
The scale of the meter adjusts to fit the currently displayed data run.
Setting the scale of a meter
1. Touch the Meter Tools button to open the tool palette.
2. Touch the Properties button to open the Properties screen.
3. For the Always Scale to Fit: option select off.
4. Touch the Minimum: box and enter the low value of the desired range.
5. Touch the Maximum: box and enter the high value of the desired
range.
6. Touch OK.
Changing the variable displayed in a meter
1. Touch the Meter Tools button to open the tool palette.
2. Touch the Properties button to open the Properties screen.
3. Touch the Measurement: box and select the measurement or other
variable that you want to see.
4. Touch OK.