PASCO EM-8656 AC_DC ELECTRONICS LABORATORY - Manual (Page 72)

68
AC/DC Electronics Laboratory 012-05892A
®
➂
Connect the Power Amplifier to Analog Channel C. Plug the power cord into the back of the
Power Amplifier and connect the power cord to an appropriate electrical receptacle.
➃
In the Physics Folder of the Science Workshop Experiment Library, open the document:
Macintosh: “P53 Diodes Part 2” / Windows: “P53_DIO2.SWS”
The document opens with a Scope display with a trace of voltage from Analog Channel A (V)
and a trace of voltage from Analog Channel B (V), and the Signal Generator window which
controls the Power Amplifier.
➤ NOTE: For quick reference, see the Experiment Notes window. To bring a display to the top,
click on its window or select the name of the display from the list at the end of the Display menu.
Change the Experiment Setup window by clicking on the “Zoom” box or the Restore button in the
upper right hand corner of that window.