PASCO EM-8656 AC_DC ELECTRONICS LABORATORY - Manual (Page 74)

70
AC/DC Electronics Laboratory 012-05892A
®
• The “A” channel trace on the Scope display is the voltage across the diode. The “B” channel trace
is the voltage across the resistor.
➃
To “capture” the data displayed in the Scope, click the “PAUSE” button ( ) to temporarily
halt data monitoring when both traces are completely across the Scope screen.
➄
To save the data for the top trace, click the top “Data Snapshot” button ( ) in the right hand
corner of the Scope display. This will open the “Data Cache Information” window.
➆
Enter information for the “Long Name”, “Short Name”, and Units, then click “OK”.