PASCO EM-8656 AC_DC ELECTRONICS LABORATORY User Manual
Page 81
77
012-05892A
AC/DC Electronics Laboratory
®
12
Click the “OFF” button (
) in the Signal Generator window. Turn off the power switch on
the back of the power amplifier.
ANALYZING THE DATA: Power Supply, Single Diode
➀
Select “Save As…” from the File menu to save your data.
➁
Select “New Graph” from the Display menu.
➂
Change the input. Click the “Input Menu” button (
). Select “Data Cache, Rectified
Voltage” from the Input Menu.
➃
Click the “Add Plot” menu button (
) at the lower left corner of the Graph. Select “Data
Cache, Filtered Voltage” from the “Add Plot” menu.
➄
Click again on the “Add Plot” menu button (
) at the lower left corner of the Graph.
Select “Data Cache, Load Resistor Voltage” from the “Add Plot” menu.
➅
Click anywhere on the vertical axis of the top plot (Rectified Voltage). The “Enter Plot Y Scale”
window opens.