Alliance Laundry Systems UF250PV Tilt - Manual (Page 47)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
45 F232102
Monthly Preventive Maintenance
Checklist
Machine ____________________________
Operator ___________________________
Month
Checks
Observe All Safety Warnings!
Disconnect power to the machine before performing the monthly maintenance procedures.
1. Each month OR every 200 hours of operation, lubricate the bearings and seals.
(Locate the bearing lubrication decal behind the external supply unit on the top right
of the machine.)
2. Clean the AC drive fins.
3. Determine if V-belts require replacement or adjustment:
a. Check V-belts for uneven wear and frayed edges.
b. Verify that V-belts are properly tensioned.
c. Verify that V-belts are properly aligned.
4. Remove back panel and check hoses for leaks.
5. Clean inlet hose filter screen. Replace if worn or damaged.
6. Tighten motor mounting bolt locknuts, bearing bolt locknuts, and idler pulley, if
necessary.
7. Use compressed air to clean lint from motor.
8. Clean interior of machine, both basket and shell, by wiping with a water-soaked
sponge or cloth.
9. Use compressed air to clean moisture and dust from all electrical components.
10.
11.