Teledyne LXT-280 - Manual (Page 53)

Dissolved Oxygen Transmitter Appendix
Teledyne Analytical Instruments 43
A.2 Spare Parts Listing
Qty P/N Description
1 ECD-2000261 Universal Mounting Bracket Assembly
(not including U-bolt)
1 ECD-2000300 O-ring kit, Viton, for LXT-280 Enclosure
(2 O-rings & lubricant)
1 ECD-2000394 Front Cover, Housing, LXT-280, Stainless
Steel
1 ECD-3300071 Rear Cover Housing, LXT-280, Stainless
Steel
1 ECD-
2000403.3001 Electronic Module, including PROM
calibrated for DO %
1 ECD-
2000403.3013 Electronic Module, including PROM
calibrated for DO ppm
1 ECD-2000404 LXT-280 Enclosure, complete, without
Universal Mounting Bracket
1 ECD-9680066 “U” bolt 2” x 3 1/2”, 304 SS (includes nuts
and washers)
1 ECD-9680069 Terminal Screw and Clamp Assembly, set
of 9
1 ECD-9680044.1 Instrument Screwdriver with Magnetic Top
Note: In order to provide replacement proms for the LXT-280, the
transmitter serial number and the software serial number
are needed. The transmitter serial number is located on
the serial number tag located inside the instrument. The
software serial number can be found by briefly turning off
the power to the instrument, then applying the power
again. The serial number is a four-digit number located on
the Copyright Display.
A minimum charge is applicable to spare parts orders.
Note: Orders for replacement parts should include the part
number (if available) and the model and serial number of