Fairbanks 6020 Series Titan Motor Truck Scale User Manual
Page 7
Installation consists of the following:
•
Foundation check, layout, and base plate setting
•
Tools, materials, documentation, and a crane
•
Setting the modules
•
Setting the modules on load cells
A. Preparations for Installation: Tools, Equipment, and Materials Required
1.
Certified Prints
2.
A mobile crane of sufficient capacity to safely lift and place the weighbridge
modules.
•
Approximate Steel Deck Module maximum weight: 8 tons.
3.
Four (4) equal length (20 ft) lifting chains or cables with hooks to safely attach to the
modules lifting channels located on the sides of the modules.
4.
Machinist’s levels (Starrett # 134 & 132-6)
5.
Hand tools
6.
Hammer Drill with
5
/
8
" bit, 16" long
7.
Hydraulic jacks, 16 ton capacity
8.
100' steel tape measure
9.
Stringline and chalkline
10. Prybars
11. High-quality grease and anti-seize
12. Load cell locating tools, Part No. 707118
50745
7
03/10 Rev. 5
Section 3: Installation
Note: The lifting straps MUST be requested in advance from the Crane Service Company.