Fairbanks HVX Series TALON SERIES Motor Truck Scale - Manual (Page 29)

B. Load Cells and Load Cell Hardware
LCF-HR4020-2A FLINTEC
Part No. Description Scale Type
70510 Load Cell, 5½" RC, 30t,1000 Ohm, 2 mV/V
72274 "O" Ring, 5½", INSIDE of Cup,*ANSI #222 HV
64340 "O" Ring, 5½",OUTSIDE of Cup*ANSI #228 HV
70511 Receiver Cup, 5½" LOWER (w/ anti-rotation pin) HV
70512 Receiver Cup, 5½", UPPER HV
64382 Roll Pin, ½" x 2½" anti-rotation, baseplate HV
63981 Anti-Rotation Pin, LOWER Receiver Cup 3 /
8
" x 2½" HV
71717 Locating Tool 5½" HV
LCF-HR4020-21 FLINTEC
80453
Load Cell, 6" RC, 100k,1000 Ohm, 2 mV/V
72274 "O" Ring, 5½", INSIDE of Cup,*ANSI #222 HVX
64340 "O" Ring, 5½",OUTSIDE of Cup*ANSI #228 HVX
70511 Receiver Cup, 5½" LOWER (w/ anti-rotation pin) HVX
70512 Receiver Cup, 5½", UPPER HVX
87481 Receiver Cup, 6" LOWER (w/ anti-rotation pin), ECO 607 HVX
87482 Receiver Cup, 6" UPPER, ECO 607 HVX
64382 Roll Pin, ½" x 2½" anti-rotation, baseplate HVX
63981 Anti-Rotation Pin, LOWER Receiver Cup 3 / 8 " x 2½" HVX
107118 Locating Tool 6" HVX
* ANSI# XXX: Defines a standard "O" ring size. "O" rings may be obtained at many hardware,
hydraulic, or plumbing supply house by using the number.
* ECO 607: Effective Date: Jan. 2008 changed from 70511 and 70512 Cups to 87481 and 87482
Cups on HVX with 6” 100k Cells. This cup change increases the height of the scale by one-half an
inch + ½”.
50785 29 04/12 Rev. 5