Finish Thompson SP22 Series Self-Priming - Manual (Page 13)

13
SP22 PART NUMBER EXPLANATION
NOTE: Pump end includes wetted components, drive magnet and motor adapter The wet end includes wetted components only
Part Number Explanation
The base model number contains standard components Where standard components are not suitable, add the alternative compo-
nent code letter after the base model number to substitute components Example: SP22P-E-U-21 is constructed of the listed base
model components except it has an EPDM O-ring, union connections, and a 213TC motor adapter
The model number is on the serial number label located on the motor adapter The model number contains a base model that features certain standard components
Compare the model number on the pump to the adjacent chart to determine if the pump contains any alternate components Model numbers containing “P” have primary
components molded from polypropylene Model numbers contain “V” have primary components molded from PVDF
Base model numbers are: SP22P, SP22V
Alternative Components Price Adders
Component▼ Base▼ Alternative▼ Code▼
Bushing Carbon or PTFE T
O-ring Viton or EPDM E
Connection NPT or
BSP B
Union U
Steel Enforced Flange Fs
2” x 2” FRP flange Ff
3” x 2” FRP flange 3 x 2
Impeller
1 (60 Hz)
7”
or
1A 1B 1C 2 2A 2B 2C 3
6 88” 6 75” 6 63” 6 50” 6 38” 6 25” 6 13” 6 00”
3A 3B 3C 4 4A 4B 4C 5
5 88” 5 75” 5 63” 5 50” 5 38” 5 25” 5 13” 5 00”
Magnet
(Upgrade
for specific
gravity correc-
tions)
8-pole
Up to 13 HP (60
Hz) / 7.5 kW (50
Hz)
or No Upgrade Available
Motor Adaptor 182-184TC NEMA or
145TC NEMA 145
213-215TC NEMA 21
IEC 90/B14 94
IEC 100/B14 04
IEC 112/B14 24
IEC 132/B14 34
IEC 90/B5 95
IEC 100/B5 05
IEC 112/B5 25
IEC 132/B5 35
Gas engine mounting Ge
Specials Not Standard
SiC bushing/shaft Ss
SiC bushing/impeller thrust ring/shaft Si
Hastelloy shaft Hs
Titanium Hardware TI
Non-sparking ring Ns
O-ring vapor protection kit FKM (NEMA) Vv
O-ring vapor protection kit EPDM (NEMA) Ve
Motor Not Standard Select Motor Reference Number from Motor Price Sheets