Acer Altos G320 Series - Manual (Page 103)

93
RAID configuration utility
Caution! Using the RAID configuration utility erases all data
previously saved in the hard drives. Make sure that you backup
important files before starting the configuration process.
SATA RAID configuration utility
The SATA RAID configuration utility allows you to configure and
manage RAID arrays. The configuration utility resides in the BIOS and is
independent of the OS. With the configuration utility, you can:
• Select a configuration method for physical arrays and logical drives
• Initialize logical drives
• Rebuild failed drives
• Check data consistency
For detailed information on how to use this utility, refer to “Appendix
B: SATA RAID configuration” on page 95.
SCSI RAID configuration utility
The SCSI RAID configuration utility allows you to change the default
RAID configuration, such as the system volume of your SCSI hard disk.
For detailed information on how to use this utility, refer to “Appendix
C: SCSI RAID configuration” on page 115.
AA G320_UG_EN.book Page 93 Tuesday, August 30, 2005 2:34 PM