Initializing a raid volume – Acer Altos G320 Series User Manual
Page 130
Appendix C: SCSI RAID configuration
120
3
Select YES. In the menu, the selected drive’s indicator will change
from READY to HOTSP.
4
Press Esc to end the array configuration.
5
Select YES to Save Configuration, then press any key to return
to the Configuration menu.
Initializing a RAID volume
1
Press Esc to return to the Management menu.
2
Select Initialize. All logical drives will appear under Logical Drives.
3
Using the spacebar, select the drive that you want to initialize. The
selected drive becomes yellow.
4
Press F10, then select YES to start initialization.
5
When initialization is complete, press any key to continue.
6
Press Esc to return to the Management menu.
7
To exit the utility and reboot the server, follow the steps below:
(a) In the Management menu, press Esc.
(b) Select YES.
(c) Press Ctrl+Alt+Del to reboot the server.
8
Install an Operating System to the RAID array.
AA G320_UG_EN.book Page 120 Tuesday, August 30, 2005 2:34 PM