Installing and removing storage devices – Acer Altos G320 Series User Manual

Page 39

Advertising
background image

29

Installing and removing storage devices

The system supports 3.5-inch and 5.25-inch internal storage devices.
The system comes pre-installed with a floppy drive and a DVD or a
Combo drive. The empty 5.25-inch half-height bays allow you to install
additional drives such as another DVD drive or a tape drive.

To remove a 5.25-inch storage device

1

Observe the ESD precautions and pre-installation procedures
described on page 25.

2

Disconnect the IDE power (1) and data (2) cables from the old
drive.

3

Push the lever in the direction of the unlock icon

(3), then pull

the drive out of the chassis (4).

4

Observe the post-installation instructions described on page 26.

AA G320_UG_EN.book Page 29 Tuesday, August 30, 2005 2:34 PM

Advertising
This manual is related to the following products: