Acer Altos G320 Series - Manual (Page 79)

69
Exit
The Exit menu displays the various options to quit from the BIOS setup
utility. Highlight any of the exit options then press Enter.
Parameter Description
Exit Saving
Changes Saves changes made and close the BIOS setup utility.
The F10 key can also be used for this operation.
Exit Discarding
Changes Exits system setup without saving any changes.
The Esc key can also be used for this operation.
Load Optimal
Defaults Loads the default settings for all BIOS setup parameters.
Setup Defaults are quite demanding in terms of
resources consumption. If you are using low-speed
memory chips or other kinds of low-performance
components and you choose to load these settings, the
system might not function properly.
The F9 key can also be used for this operation.
Load Custom
Defaults Loads the custom settings for all BIOS setup parameters.
AA G320_UG_EN.book Page 69 Tuesday, August 30, 2005 2:34 PM