IAI America LSA-L15SS - Manual (Page 16)

10
Names of the Parts
In this manual, the right-left directions of the actuator are indicated by viewing the actuator from its
top and also from its home side, with the actuator placed horizontally. “Front” refers to the side
opposite to one on which the actuator home is located.
1. Small Type H8SS, H8SM (Note 1) , H8HS, H8HM (Note 1)
Note 1 Multi-slider type: There are two sliders mounted.
Cable track
Stainless
steel sheet
Slider cover
Side cover
Cable in the bearer
Right
Left
Slider
End cover
Home side

2. Flat Type L15SS, L15SM (Note 1)
Note 1 Multi-slider type: There are two sliders mounted.
Cable in the bearer Cable track
Right
Left
Home side
Slider
End cover End cover
Linear guide


(Reference)
In the above figure, the cables are facing up or the top side, while the home is located on the
right side. The actuator is shipped with its home adjusted to the side specified by the customer.
Accordingly, the home position on your actuator may be different from the direction shown in the
figure.