IAI America LSA-L15SS - Manual (Page 45)

2. Installation
39
2.3.5 Mount of Connector Box and Others
T-slots are provided on the side faces of the actuator for installation of a connector box or other
external equipment. If you are using a wiring kit, install a connector box using these T-slots.
T-slots can also be used for other purposes, such as installing sensors or securing cables.
The T-slot dimensions are specified below.
• Use of square nuts is recommended in T-slots, but hex nuts can also be used.
• When installing an object using T-slots, select bolts of an appropriate length so that the tip of the
bolt will not contact the bottom of the T-slot.
Small Type H8SS, H8SM, H8HS, H8HM Flat Type L15SS, L15SM
2.7
5.5
1.8
4.5 2
3.3
5.8
4.3 7.3
T-slot Dimensions
Model T-slot Nut Diameter
Small Type H8SS, H8SM, H8HS, H8HM M3
Flat Type L15SS, L15SM M4