IAI America PCON-ABU - Manual (Page 23)

5
1.5 Warranty
1. Warranty Period
One of the following periods, whichever is shorter:
•
18 months after the shipment from IAI’ s factory
• 12 months after the delivery to the specified location
(1) The breakdown or problem in question pertains to our product as delivered by us or our
authorized dealer.
(2) The breakdown or problem in question occurred during the warranty period.
(3) The breakdown or problem in question occurred while the product was in use for an appropriate
purpose under the conditions and environment of use specified in the operation manual and catalog.
(4) The breakdown or problem in question was caused by a specification defect or problem,
or by the poor quality of our product.
Note that breakdowns due to any of the following reasons are excluded from the scope of warranty:
Our products are covered by warranty when all of the following conditions are met. Faulty products
covered by warranty will be replaced or repaired free of charge:
[1] Anything other than our product
[2] Modification or repair performed by a party other than us (unless we have approved such
modification or repair)
[3] Anything that could not be easily predicted with the level of science and technology available
at the time of shipment from our company
[4] A natural disaster, man-made disaster, incident or accident for which we are not liable
[5] Natural fading of paint or other symptoms of aging
[6] Wear, depletion or other expected result of use
[7] Operation noise, vibration or other subjective sensation not affecting function or maintenance
Note that the warranty only covers our product as delivered and that any secondary loss arising
from a breakdown of our product is excluded from the scope of warranty.
3. Honoring Warranty
As a rule, the product must be brought to us for repair under warranty.
2. Scope of Warranty
4. Limited Liability
[1] We shall assume no liability for any special damage, consequential loss or passive loss such
as a loss of expected profit arising from or in connection with our product.
[2] We shall not be liable for any program or control method created by the customer to operate
our product or for the result of such program or control method.