JuiceGoose P90 Series - Manual (Page 30)

P90 USER’S MANUAL UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion Corporation (Rev 8/29/13) Page 30
03: Output Frequency Setting
Interface Setting
You may set the initial frequency on battery mode:
BAT 50: presents output frequency at 50Hz
BAT 60: presents output frequency is 60Hz
If converter mode is enabled, you may choose the following
output frequency:
CF 50: presents output frequency at 50Hz
CF 60: presents output frequency at 60Hz
04: ECO enable/disable
Interface Setting
ENA: ECO mode enable
DIS: ECO mode disable
05: AECO enable/disable
Interface Setting
ENA: Advanced ECO mode enable
DIS: Advanced ECO mode disable