JuiceGoose P90 Series User Manual
Page 34
P90 USER’S MANUAL
UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion Corporation (Rev 8/29/13)
Page 34
Operating
Mode
Description
LCD Display
Rack Display
Tower Display
Battery Mode
When the input voltage is beyond
the acceptable range or there is a
power failure and alarm is
sounding every 4 seconds, the UPS
will provide backup power from
battery.
Bypass Mode
When input voltage is within
acceptable range but UPS is
overloaded, the UPS will enter
bypass mode or bypass mode can
be set by the front panel. Alarm is
sounding every 10 seconds.
Standby Mode UPS is powered off without output
power, but the battery is still being
charged.
Fault Mode
The UPS is in fault mode when no
output power is supplied from the
UPS and the fault icon flashes on
the LCD display, although the
information from the UPS can be
displayed on the screen.