JuiceGoose P90 Series - Manual (Page 47)

P90 USER’S MANUAL UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion Corporation (Rev 8/29/13) Page 47
XTREME POWER CONVERSION LOAD PROTECTION POLICY
THIS POLICY IS NOT A WARRANTY. REFER TO THE XPC CORPORATION, INC. LIMITED WARRANTY FOR INFORMATION CONCERNING THE
WARRANTY FOR YOUR XPC PRODUCT. THE LIMITATIONS AND CONDITIONS CONTAINED IN THIS POLICY DO NOT AFFECT THE TERMS OF THE
XPC LIMITED WARRANTY.
Definitions:
1. “Product” means a Standard 120, 208, or 240 Volt power protection device that is used in the United States and Canada. This policy
does not include custom manufactured products.
2. “Power Disturbance” means an AC power line transient (telephone line or Local Area Network, if applicable), spike or surge.
3. “Connected Equipment” properly connected electronic equipment
4. “Fair Market Value” of damaged Connected Equipment as determined by XPC shall be the lower of (a) the average price the same or
similar items are being sold for on eBay, (b) the price list of Orion Blue Book (or if such price list is no longer published, a published
or announced price list reasonably selected by XPC), (c) the lowest price the same or similar items can be purchased for in the United
States or (d) the total amount of all payment(s) you have or are entitled to receive from insurance, other warranties, extended
warranties, a legal liability claim or from other sources or persons for the damaged Connected Equipment.
5. “Purchaser” means the person or entity that originally purchased the Product from an authorized reseller or distributor of XPC
Products.
The Purchaser of this Product is protected, for the term of the XPC Limited Warranty, against certain losses caused by a Power Disturbance for
properly connected electronic equipment (referred to as the "Connected Equipment") subject to certain terms and conditions provided below.
This policy applies only to the original purchaser of the Product. If the Product is transferred or sold to another person or entity, this policy is
void.
Load Protection Policy Dollar and Period Limits
For purchasers that meet the qualifications and conditions set forth in this policy, XPC will provide reimbursement (cost of repair or fair market
value as determined by XPC) during the period limits and up to the dollar limits stated as follows:
PRODUCT DOLLAR LIMIT PERIOD OF COVERAGE
XVT 25,000 Term of XPC Limited Warranty
XST 25,000 Term of XPC Limited Warranty
XPRT 6kVA & 10kVA 50,000 Term of XPC Limited Warranty
NXRT 50,000 Term of XPC Limited Warranty
P90, P90L, P90g, P90Lg 50,000 Term of XPC Limited Warranty
T90 50,000 Term of XPC Limited Warranty
TX90, TX90i 50,000 Term of XPC Limited Warranty
This Load Protection Policy is not deemed "first dollar" coverage. XPC’s obligation is reduced by any amounts that the Purchaser is entitled to
recover, from other sources regarding the Connected Equipment, including, but not limited to, insurance, other warranty, extended warranty,
or legal liability, regardless of whether or not the Purchaser makes a claim for recovery.
Eligibility for Coverage Under the Load Protection Policy
1. The Product must be registered on the XPC website, www.xpcc.com, within 10 days of purchase. All required information must be
provided, and Purchaser should retain a copy for Purchaser’s records. When registering on the website, Purchaser must list all
connected equipment that is directly connected to the product. Only those devices registered in that manner will be covered.
2. All Connected Equipment must be UL or CSA approved.
3. The Product must be plugged into a properly wired and grounded outlet. Use of input surge devices, extension cords, adapters,
ground wires, or electrical connections not manufactured by XPC voids the XPC Load Protection Policy. No other surge protection
device may be connected to the output sockets of the Product. The installation must comply with all applicable electrical and safety
codes set forth pursuant to the NEC.
4. The Product must have undeniable physical evidence of a Power Disturbance that directly and proximately caused the damage;
5. The Connected Equipment must have been damaged by a Power Disturbance on a properly installed, grounded, and National
Electric Code, ("NEC"), code-compliant 120, 208, 240 Volt AC power line in the United States or Canada, by a Power Disturbance on
standard telephone land line or PBX telephone equipment line that is properly installed and connected to an RJ11 port on the
Product; or by a Power Disturbance on a standard Local Area Network connection that is properly installed and connected to an RJ45
port on the Product and (d) is directly plugged into, and properly connected to, the Product in its original condition which was
properly operated when a Power Disturbance passed through the Product and (i) exhausts the protection capacity of the Product or
(ii) damages the Product.
6. The Load Protection Policy does not apply if the Product has been operated in a failure mode or not in compliance with XPC
operating instructions in the Product user's manual, or if the Connected Equipment has not been operated in compliance with the
instructions and manuals of its manufacturer/vendor.
7. This policy is null and void if, XPC determines, in its sole discretion, that the Product has been tampered with or altered in any way.
What is Not Covered Under the Load Protection Policy: