KB Electronics KBIC-240DS - Manual (Page 11)

11
TABLE 6. PLUG-IN HORSEPOWER RESISTOR CHART (1)
Motor Horsepower (2)
Armature Voltage
(90 VDC)
ArmatureVoltage
(180 VDC)
Approx. Motor
Current (DC
Amps)
Plug-In
Horsepower
Resistor ®
Value (Ohms)
Individual
Plug-In
Horsepower
Resistor ®
P/N
1/100 1/50 0.1 1.0 9833
1/50 1/25 0.2 0.51 9834
1/30, 1/25 1/15 0.35 0.35 9835
1/20 1/10 0.5 0.25 9836
1/15, 1/12 1/6 0.8 0.18 9837
1/10, 1/8, 1/6 1/4 1.3 0.1 9838
1/4 1/2 2.5 0.05 9839
1/3 3/4 3.3 0.035 9840
1/2 1 5.0 0.025 9841
3/4 1 –1/2 7.5 0.015 9842
1 2 10.0 0.01 9843
1 –1/2 3 15.0 0.006 9850
Notes: 1. Motor horsepower and armature voltage must be specified in order to select correct Plug-
In Horsepower Resistor
® . 2. For motor horsepower not indicated, use lower value Plug-In
Horsepower Resistor ® .
A Plug-In Horsepower Resistor ® , must
be installed to match the KBIC ® to the
motor horsepower and voltage. See
Table 6, above for the correct value.
Plug-In Horsepower Resistors
® are
stocked by your distributor.
Plug-In Horsepower Resistor ®
CAUTION – Be sure Plug-In
Horsepower Resistor
® is inserted
completely into the mating socket.