KB Electronics KBIC-240DS User Manual
Page 7
7
4.3 Acceleration Start – The KBIC
®
contains an adjustable acceleration start feature that allows the
motor to smoothly accelerate from 0-full speed over a time period of 0.5-4 seconds. The "ACCEL"
is factory set at 2 seconds.
4.4 Limitation in Use – The KBIC
®
controls are designed for use on machine applications.
4.5 Armature Switching – Do not switch the armature without taking proper precautions. (Refer to
Armature Switching and Dynamic Braking, Section 9.2 on page 20).
CAUTION! Consult factory before using on constant horsepower applications such as saws or drill
presses. Do not use in explosive atmosphere. Be sure the KBIC
®
is used within its maximum ratings.
Follow all installation instructions carefully (Refer to Section 5, on page 12).
FIGURE 2. MECHANICAL SPECIFICATIONS
OPTIONAL AUXILIARY HEATSINK
POTENTIOMETER
MOUNTING "A"
6 SLOTS
CONTROL
MOUNTING "B"
TAPPED 6-32
(3 PLACES)
FUSE MOUNTING
TAPPED 6-32
(2 PLACES)
ANTI-ROTATION
PIN
Note: All dimensions are shown in inches.