LEESON SM-Basic Series Sub-Micro Inverters (Obsolete) - Manual (Page 2)

EC Declaration of Conformity
In accordance with EN45014:1998
We,
Leeson Electric Corporation
2100 Washington Street
Grafton, Wisconsin 53024
USA
declare under sole responsibility that the following equipment to which this declaration relates, meets the
essential health and safety requirements and is in conformity with the relevant sections of the applicable
EC standards and other normative documents. If changes are made to the product that is covered by this
declaration of conformity, the declaration of conformity is no longer valid.
Equipment Type:
AC Variable Frequency Motor Drives:
174374.00 174375.00 174376.00 174377.00 174378.00
174379.00 174380.00 174381.00 174382.00 174383.00
174384.00 174385.00 174386.00 174387.00 174388.00
EC Directives:
By virtue of this conformity, the products are deemed to comply with the provisions of the Council of
European Communities Directives listed, provided installations are carried out in accordance with the
manufacturer’s instructions.
1) Low Voltage Directive 73/23/EEC as amended 93/68/EEC
2) Electromagnetic Compatibility Directive 89/336/EEC as amended 92/31/EEC
Harmonized Standards Used:
EN50081-2*: Electromagnetic Compatibility — Generic Emission Standard; Part 2: Industrial
Environment
EN50082-2*: Electromagnetic Compatibility — Generic Emission Standard; Part 2: Industrial
Environment
EN50178; 1998 Electronic Equipment for use in Power Installations
* with suitable filters that are properly installed
Authorized Representative:
Ms. Elisa Basso
Leeson Electric International
Phone: (+39) 0-51-732-247
Via Caduti Di Sabbiuno 11/D-E Fax: (+39) 0-51-734-943
40011 Anzola Emilia Bologna
Italy
Dated this 2 st day of May 2000.
Peter F. Hennig
Senior Design Engineer
Revision: 00, 5/02/2000