0 parameter menu – LEESON SM-Basic Series Sub-Micro Inverters (Obsolete) User Manual
Page 25
21
14.0
PARAMETER MENU
NOTE 1:
Factory defaults are shown for a 60 Hz base frequency. See Parameter 48 for 50 Hz base frequency.
FACTORY
FACTORY
FACTORY
FACTORY
NO.
NO.
NO.
NO.
PARAMETER NAME
PARAMETER NAME
PARAMETER NAME
PARAMETER NAME
RANGE OF ADJUSTMENT
RANGE OF ADJUSTMENT
RANGE OF ADJUSTMENT
RANGE OF ADJUSTMENT
DEFAULT
DEFAULT
DEFAULT
DEFAULT
(NOTE 1)
01
LINE VOLTAGE
HIGH (01), LOW (02)
HIGH (01)
02
CARRIER FREQUENCY
4kHz (01), 6 kHz (02), 8 kHz (03), 10 kHz (04)
6 kHz (02)
03
START METHOD
NORMAL (01), START ON POWER UP (02),
NORMAL (01)
START WITH DC BRAKE (03),
AUTO RESTART WITH DC BRAKE (04),
FLYING RESTART 1 (05), FLYING RESTART 2 (06),
FLYING RESTART 3 (07)
04
STOP METHOD
COAST (01), COAST WITH DC BRAKE (02),
COAST (01)
RAMP (03), RAMP WITH DC BRAKE (04)
05
STANDARD SPEED
KEYPAD (01), PRESET #1 (02),
KEYPAD (01)
SOURCE
SPEED POT (03)
06
TB-14 OUTPUT
NONE (01), RUN (02), FAULT (03),
NONE (01)
INVERSE FAULT (04), FAULT LOCKOUT (05),
AT SET SPEED (06), ABOVE PRESET #3 (07),
CURRENT LIMIT (08), AUTO SPEED (09),
REVERSE (10), DB BRAKE (11)
10
TB-13A FUNCTION
NONE (01), SPEED POT (02),
NONE (01)
SELECT
PRESET SPEED #1 (03), START FORWARD (04),
RUN REVERSE (05), START REVERSE (06),
EXTERNAL FAULT (07), DB FAULT (08),
AUXILIARY STOP (09), ACCEL/DECEL #2 (10)
11
TB-13B FUNCTION
NONE (01), SPEED POT (02),
NONE (01)
SELECT
PRESET SPEED #2 (03), DECREASE FREQ (04),
JOG FORWARD (05), JOG REVERSE (06),
EXTERNAL FAULT (07), DB FAULT (08),
AUXILIARY STOP (09), ACCEL/DECEL #2 (10)
12
TB-13C FUNCTION
NONE (01), SPEED POT (02),
NONE (01)
SELECT
PRESET SPEED #3 (03), INCREASE FREQ (04),
START FORWARD (05), EXTERNAL FAULT (06),
DB FAULT (07), AUXILIARY STOP (08),
ACCEL/DECEL #2 (09)