LEESON Chassis Mount PWM Control: 175292.00 - Manual (Page 37)

31
Relays may be used in place of a switch, but a neutral position
must be provided to prevent plug reversing (see Figure 18,
page 32). DO NOT CHANGE DIRECTIONS WHILE THE
MOTOR IS STILL RUNNING. Plug reversing the motor (not
allowing the motor to come to a stop before reversing) will
cause excessively high currents to flow in the armature circuit,
which can damage the control and/or motor and is not
recommended.
Reversing
Application Notes
Warning
Do not operate the control outside the recommended
input ±10%.
ƽ