Staub Electronics B-500-MTRX-230-8X16 BINARY - HDMI 8X16 MATRIX SWITCH WITH HDMI AND HDBASET OUTPUTS - Manual (Page 21)

B-500-MTRX-230 Installation Manual
Pg. 21
www.snapav.com Support: 866.838.5052
8.5.2. How to Learn EDID to All Input
8.6. Viewing Input EDID Status
If there is a question about the EDID set for an input, the status of that input’s EDID can be reviewed using the
included IR remote and watching the matrix switcher front panel display.
Example: View the EDID for Input 3.
Display Readout (Example)
EDID 5
Assigned from
Embedded EDID
Table
EDID Learned
from Output 4
1. Press STATUS    
2. Press INPUT    
3. Press Number Key/s to select the Output the EDID is learned from.
Use 10+ to select Outputs through 10-16
 0 ..  0 ..
4. Press ENTER 0 0 .. 0 .4. 0..
Example: Input=All EDID Learned from Output 4 Display Readout (Example)
1. Press LEARN L ._. 
2. Press OUTPUT L ._. 
3. Press Number Key/s to select the Output the EDID i learned from.
Use 10+ to select Outputs through 10-16
04  ..
4. Press ENTER
  (success)
FF FF (fail)