Staub Electronics B-500-MTRX-230-8X16 BINARY - HDMI 8X16 MATRIX SWITCH WITH HDMI AND HDBASET OUTPUTS - Manual (Page 25)

B-500-MTRX-230 Installation Manual
Pg. 25
www.snapav.com Support: 866.838.5052
11.1.4. Resetting to Factory Defaults
This procedure resets the B-500-MTRX-230 to factory defaults:
• EDIDs - 1080p 60 2 channel stereo (embedded 2)
• I/O - All Outputs set to Input 1
Reset Factory Defaults Display Readout (Example)
1. Press DEFAULT  
2. Press DEFAULT  
3. Press DEFAULT  
4. Press DEFAULT  
5. Press ENTER 0 0
Note: Resetting factory defaults can take up to 2 minutes to complete. Wait until the screen displays an output and input
selection of 1.1 before attempting further setup or use.