Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual - Manual (Page 109)

Getting Started Manual
922172-00 Rev A 101
NOTE: If you minimize the application, touch the appropriate task bar or
desktop icon to maximize it:
Restarting the Operating System
If you need to restart the Windows® operating system, reboot the
oscilloscope by pressing and holding in the power switch for 10 seconds,
then turning the power on again.
Windows Activation
Click Start in the task bar, and then select All Programs  Activate
Windows. Follow the prompts on the Activate Windows wizard.
NOTE: After Windows Activation is completed, this selection no longer
appears on the All Programs menu.

If you elected to activate by internet, enter the Activation ID (Product
Key number on the bottom of the oscilloscope) number when
prompted to do so, and then click Next. Windows Activation then
starts.

If activating by phone, select the oscilloscope location (country). Then
dial the number provided to you over the phone. When asked, verbally
repeat the installation ID listed on the screen. Enter the 7-part number
given to you in the empty boxes at the bottom of the screen. Click the
Next button to proceed.
Check the revision levels of the X-Stream software, virus definitions, and
Windows updates. Visit the vendors’ Web sites and download all necessary
updates.