Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual - Manual (Page 23)

Getting Started Manual
922172-00 Rev A 15
Grid Area
The grid area is divided into 8 vertical divisions and 10 horizontal divisions.
There are several indicators on the grid to help you understand the
following:

Trigger Delay setting

Trigger Level Setting

Trace Zero Level
These indicators are color-coded to the same color as the channel that the
oscilloscope is currently set to trigger on.
Trigger Delay Indicator
The trigger delay Indicator is a color-coded triangle
that is positioned horizontally on the grid.
Trigger delay horizontally positions the
oscilloscope trace on the display so you can
observe the signal prior to the trigger time. It
adjusts the pre- and post-trigger time.