Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual - Manual (Page 16)

WaveSurfer MXs-B Oscilloscopes
8 922172-00 Rev A
Vertical Controls
Vertical Controls are multiplexed for each
channel. The lighted channel button indicates
which channel the controls are active for.
Turn channels ON by pressing the
corresponding channel button.
Channels are made active by pressing the
channel button again.
Turn channels OFF by pressing the channel
button (activating it), and then pressing again
to turn it OFF.
When a channel is active, its descriptor label changes appearance.
Inactive Channel Active Channel
When a channel is turned OFF, the next channel in sequence becomes the
active channel.
If no front panel channel buttons are lit, it means either that no channels
are turned ON, or that a Math, Zoom, or Memory trace is active. In that
case, the vertical offset and sensitivity knobs adjust the vertical position
and vertical scale of the Math, Zoom, or Memory (Reference Waveform)
trace.