Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual - Manual (Page 97)

Getting Started Manual
922172-00 Rev A 89
Printing from the Oscilloscope
2. You can print in one of three ways:
3. Press the printer button on the front panel.
4. Touch File  Print from the menu bar.
5. Touch the Print Now button in the Hardcopy dialog
Adding Printers and Drivers
NOTE: If you want to add a printer driver, the driver must first be loaded on
the oscilloscope.
1. Touch File  Print Setup... from the menu bar. The Utilities Hardcopy
dialog opens.
2. In the dialog area, touch the Printer icon.
3. Touch the Add Printer button. The Print screen is then shown.
4. Touch the Properties button to change printer properties such as
number of copies.
Changing the Default Printer
1. Change the default printer by minimizing the instrument application by
touching File  Minimize from the menu bar.
2. Touch the Start button in the task bar at the bottom of the screen.
3. Select Settings  Printers.
4. Touch the printer you want to set as the default printer, then touch
File, Set as Default Printer.