Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual - Manual (Page 53)

Getting Started Manual
922172-00 Rev A 45
Reading Cursor Information
Cursor information is displayed in two different places on the WaveSurfer
MXs-B oscilloscope display.
Descriptor Labels
The Descriptor Labels for Channels, Math, Zoom, and
Memory traces contain both absolute and relative
amplitude (voltage) cursor information.
Cursor Table
The cursor table underneath the Timebase
and Trigger descriptor labels appears when
Horizontal (Time) or Horizontal (Frequency) cursors are turned on. This
table contains the common absolute and relative information for the two
cursors, and frequency information (if Horizontal cursors are selected).
If the display is in XY Mode, XY cursor information is shown underneath the
XY display.