Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual - Manual (Page 83)

Getting Started Manual
922172-00 Rev A 75
Touch the Channel, Math, or Zoom descriptor label
twice to open the dialog for the trace that you desire to
save to a reference location.
Touch the Store button in the toolbar at the bottom of
the dialog.
The trace is saved to its corresponding Memory trace (C1 to M1, C2 to M2,
etc., Z1 to M1, Z2 to M2, etc., Math to M1) and displayed on the grid. The
memory trace has a descriptor label, a dialog, etc. like all other traces. It
can even be zoomed and repositioned on the grid.
1. Choose Math  Memory Setup
from the menu bar.
2. Choose a Memory location from
the Memory Setup dialog. In this
example, we’ll choose M1.
3. Choose a waveform to save into
this memory. In this example, we’ll
choose to save C1 into this M1
memory location.
After you’ve selected the
waveform to save into memory,
touch Copy Now.
The M1 memory trace contains the
C1 waveform present at the time
of the save, the M1 trace is turned
ON, and the descriptor label is
active. The position and scale can
be changed with the front panel
controls, just like a zoom trace.