Menu bar – Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual User Manual
Page 22
WaveSurfer MXs-B Oscilloscopes
14
922172-00 Rev A
Menu Bar
The top menu bar provides access to various software dialogs. It is very
similar to the File menu on any Windows program. For common
oscilloscope operations, you don’t need to use the top menu bar (since you
can access most dialogs from the Front Panel or from the Descriptor
Labels). However, it is the only way to access setup or other dialogs for the
following:
Display Setup
Save or Recall Waveform
Save or Recall Setups
Print Setup
Vertical (Channel), Horizontal, or Trigger Status
Memory (Reference Waveform) Setup
Pass/Fail Setup
Utilities and Preferences Setup
At the right-hand end of the top menu bar is an Undo button.
This button appears after the AutoSetup front panel button is pressed, and
after Zooming. If you want to perform an Undo operation, it must be the
very next operation after you perform the Autosetup or Zoom operation.