Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 152)

P A R T T W O : C O M M A N D S
146
ISSUED: February 2005 WM-RCM-E Rev D
FUNCTION
FIND_CTR_RANGE, FCR
Command
DESCRIPTION
The FIND_CTR_RANGE command automatically sets the center
and width of a histogram to best display the accumulated events.
COMMAND SYNTAX <function>:Find_Ctr_Range
<function>:={TA,TB,TC,TD,F1,F2,F3,F4}
AVAILABILITY Only available with an option installed that includes Histograms.
EXAMPLE (GPIB) Assuming that Trace A (TA) has been defined as a histogram of one
of the custom parameters, the following example will determine the
best center and width and then rescale the histogram:
CMD$=“TA:FCR”: CALL IBWRT(SCOPE%,CMD$)
RELATED COMMANDS
DEFINE, PARAMETER_CUSTOM